Ozone Therapy

The CGA-540 low flow regulator fits on an oxygen tank and regulates oxygen flow.

The low flow regulator flows oxygen from 1/32 to 4 liters per minute. It’s required if using an industrial oxygen tank in North America and select countries (international info below). This regulator will only work on a CGA-540 tank.

Flow sequence is 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1.5, 2, 3, 4. The low flow regulator operates at 50 psi.

International Oxygen Tanks

International customers (not in the USA) will probably need a different regulator. If you’re unsure which regulator you will need to use for your country then you can go here for more info: International Regulators

Also, this blog post covers many different styles of regulators for overseas customers. If you don’t know what regulator you need then please review this: Acquiring Oxygen for Ozone Worldwide

If you already know which one you need then please visit our oxygen tank regulator page to select the correct one for your tank. The product page description will also list the relevant countries that specific regulator will work in.

Due to the variety of tanks around the world, Promolife cannot guarantee a regulator will work on a specific tank outside of North America. You will want to contact your supplier to verify which regulator you need for the tank you will purchase.

Important Notes (all users)

The maximum pressure allowed in these regulators is 2600 psi. Many countries in Europe, Australia and a few others will typically fill beyond that (3000+ psi). You will need to discuss this with the oxygen tank supplier to ensure the pressure is well below the max limit to ensure the regulator isn’t compromised and no longer usable. Promolife is not responsible if the regulator is used with a higher pressure and damaged. A new regulator would have to be purchased.

Upon receipt of this item and before using, it is very important that you read the instructions in their entirety.

The Promolife ozone shorts are the only bag designed to fully seal ozone around the groin and surrounding area.

Applying ozone topically to the skin is an effective way to work on surface-related issues. The groin is considered one of the more difficult areas to treat topically with ozone because it receives very little airflow and can harbor bacteria, viruses, and fungi. A buildup of these microbes is not ideal and can lead to negative health issues. Treating the groin and surrounding area is now possible with the Promolife ozone shorts.

The Promolife ozone head bag is the only bag designed to fully seal ozone onto the scalp.

The airtight seal prevents ozone from leaking out which allows the user to safely use ozone around the head. The seal is made of silicone which adapts to most head sizes. Not recommended for children.

The bag includes pre-installed tubing with a male luer lock connector. This allows for easy connection to most ozone equipment.

Securely connect catheters to ozone tubing with this ozone-resistant, 100% Kynar adapter, designed to attach to silicone tubing that is 3/16″ ID x 5/16″ OD.

These 14F Luer Lock catheters connect securely to our reusable and multichambered insufflation bags. These catheters are available in 5, 10, or 20 packs.

These ozone limb bags are the easiest to use and designed to seal in the ozone.

These limb bags are the only bags that provide an air tight seal around the arm or leg so ozone won’t leak into the room. The seal is made of silicone which will form a tight seal on either small or large limbs.

The bag includes pre-installed tubing with a male luer lock connector. This allows for easy connection to most ozone equipment.

The Full Body Ozone Bag allows you to cover your body with ozone in a comfortable and contained way.

The full body ozone bag is one of the easiest methods we’ve found for using ozone over your body. You just attach the tubing from your ozone generator to the included adapter, zip yourself up in the bag, pull the zippers to your neck and either sit or lie down for the desired time period. Even though your arms do not stick out of the bag, we have tested and determined that a single person can use the bag effectively without help after practice.

If you have any ozone leakage from the top of the bag, you can either wrap a towel around your shoulders to block it or turn a small fan on your face to blow away the excess.

When used with a far infrared heat pad, the bag can be used as an ozone sauna suit.

THIS PROMOLIFE REGULATOR FITS OLDER, PRE-2021 MEDICAL TANKS AS WELL AS NEWER STYLE POST 2021 TANKS

The CGA 870 low flow industrial oxygen tank regulator can be used for many ozone applications.

This regulator comes with the following flow rates: 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1-1/2, 2 LPM

These ozone limb bags are the easiest to use and designed to seal in the ozone.

These limb bags are the only bags that provide an air tight seal around the arm or leg so ozone won’t leak into the room. The seal is made of silicone which will form a tight seal on either small or large limbs.

The bag includes pre-installed tubing with a male luer lock connector. This allows for easy connection to most ozone equipment.

THIS IS PROMOLIFE’S LONGER LASTING REGULATOR
The CGA-540 low flow regulator fits on an industrial oxygen tank and regulates oxygen flow.

The low flow regulator flows oxygen from 1/32 to 4 liters per minute. It’s required if using an industrial oxygen tank in North America and select countries (international info below). 

This regulator will only work on a CGA-540 tank.
Flow sequence is 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1.5, 2, 3, 4. The low flow regulator operates at 50 psi.

International Oxygen Tanks

International customers (not in the USA) will probably need a different regulator. If you’re unsure which regulator you will need to use for your country then you can go here for more info: International Regulators

Also, this blog post covers many different styles of regulators for overseas customers. If you don’t know what regulator you need then please review this: Acquiring Oxygen for Ozone Worldwide

If you already know which one you need then please visit our oxygen tank regulator page to select the correct one for your tank. The product page description will also list the relevant countries that specific regulator will work in.

Due to the variety of tanks around the world, Promolife cannot guarantee a regulator will work on a specific tank outside of North America. You will want to contact your supplier to verify which regulator you need for the tank you will purchase.

Important Notes (all users)

The maximum pressure allowed in these regulators is 2600 psi. Many countries in Europe, Australia and a few others will typically fill beyond that (3000+ psi). You will need to discuss this with the oxygen tank supplier to ensure the pressure is well below the max limit to ensure the regulator isn’t compromised and no longer usable. Promolife is not responsible if the regulator is used with a higher pressure and damaged. A new regulator would have to be purchased.

Upon receipt of this item and before using, it is very important that you read the instructions in their entirety.

The Promolife Penile Ozonation Bag is the only bag designed to fully seal ozone around the penis or the entire male genitalia.

The airtight seal prevents ozone from leaking out which allows the user to safely use ozone around the male genitalia area.

The seal is made of silicone which adapts to different sizes. To encompass the entire male genitalia area, scissors are needed to enlarge the opening.

The bag includes pre-installed tubing with a male Luer lock connector. This allows for easy connection to most ozone equipment.

Promolife’s ozone trap is ideal for trapping any liquid from entering an ozone generator or ozone accessory.

The ozone trap is like a visual check valve and can be placed anywhere you wish to prevent liquid from entering an accessory or generator while ozonating. Made from 100% Borosilicate glass. Great for trapping water or oil.